No products in the cart.
Shop
-
K 3-A Pro
Product Details
-
Supports various types of rotors like Quadrotor (X type and + type)
-
Supports Hexacopter with +type x type and coaxial types
-
Supports various types of Octacopter. The type of ESC is below 490Hz PWM ESC
-
Working voltage 2S to 12 S. Can support various types of flight modes
₹35,400.00 -
-
ADS-B Carrier Board
Product Description
-
Built-in ADS-B Antenna
-
New product Livery
-
Integration of uAvionix ADS-B IN Receiver
-
Correct labeling of CAN Ports
₹15,611.00 -
-
Cube Black
Product Details
-
Power module input (4.8V to 5.4V)
-
Servo rail input (4.8 V to 5.4 V) upto 10V manually override.
-
USB power input (4.8V to 5.4V)
-
Ideal diode controller with automatic failover
₹25,275.00 -
-
Cube Orange with ADS-B IN
Product Details
-
32 bit ARM STM 32H753 Cortex-M7 (with DP-FPU)
-
400 Mhz/1MB RAM/2 MB Flash
-
32 bit STM32F103 failsafe co-processor
-
All sensors connected via SPI
-
Regular power supply with automatic failover
-
Servo rail high-power (7V) and high current ready
-
Safety switch/LED
-
Optional carrier board for Intel Edison
₹29,736.00 -
-
Data Modem RFD 900
Product Details
RF:2 x RP-SMA connectors
Serial: Logic Level RS232 (+3.3v nominal, +5v tolerant)
Power: +5v, ~800mA max peak (at maximum transmit power)
GPIO: 6 General purpose IO (Digital, ADC, PWM capable)
₹28,621.00 -
Purple Cube
Product Details
-
Processor
32-bit ARM Cortex M4 core with FPU
168 Mhz/256 KB RAM/2 MB Flash
32-bit failsafe co-processor
-
Sensors
1xIMU (accels, gyros and compass)
1x InvenSense MPU9250 (accel and gyro)
1xMS5611 barometers
₹12,192.00 -
-
Kore Carrier Board
Product Description
The KORE Carrier Board is for the CUBE and its primary purpose is to reduce the innumerable nest of wires and modules that you can find with a multi-rotor assembly. This carrier board has been optimized geometrically for quadcopters, octocopters and X8 configurations. Thus providing all the connections for every function of the CUBE autopilot.
₹25,675.00 -
Cube Orange
Product Details
-
Having ample connectivity options for any additional peripherals
-
Integrated backup system for any in-flight recovery as well as manual override that comes with a stand-alone power supply and dedicated processor.
-
The backup system merges mixing that provides consistent autopilot and manual override with a dedicated processor and stand-alone power supply
-
External safety switch
-
Multicolour LED mains visual indicator
-
High power, multi-tone piezo audio indicator
-
microSD card for high-rate logging over an extended period of time
₹22,302.00 -
-
Mini CB
Product Details
Power Input voltage/rated input current: 4-5.7V/2.5A; 0-20V is safe for the system but it will not work
Power-rated output/input power: 14w
USB port input voltage/ rated input current: 4-5.7V/250mA
Servo rail input voltage: 4-10.5V
Waterproof: External waterproofing required
Working temperature: -10°C/55°C
Mini Carrier Board Size/Chassis Material: 47.5×38.5×17.8 (mm)/ABS Molding
₹6,394.00 -
Micasense Multispectral Sensor
Product Details
-
REDEDGE-P Sensor
-
Five spectral bands
-
Pan-sharpened output Resolution of 2 cm (0.8 in) at 60m
-
Captures faster by using CFexpress standard
-
ALTUM-PT Sensor
-
Thermal, Multispectral, and RGB outputs at higher resolutions
-
Improved GSD 1.2 cm per pixel at 60m
-
Enabled by the new CFexpress standard, it can do 2 capture per second
-
Dual Camera System
-
Data can be compared directly between drone images and satellite
-
2 cameras, ten bands, and unlimited indices
-
All ten bands can be captured in a synchronized manner for pixel-aligned imagery
₹502,000.00 -
-
F7 HD
Product Details
-
F7 flight control mode
-
Main control chip: STM32F722RET6
-
Barometer is optional and hence you need to contact Drones Tech Lab
-
RAM: on board 16MB
-
Input voltage: 12V-25.2V (3-6S)
-
BEC: 5V/2A
-
Dimensions: 37mm*37 mm
-
Weight:8.4kg
-
Mounting Distance: 30.5mm*30.5mm
-
Weight:8.4 Kg
-
Package dimensions: 4.17 x 2.56 x 0.67 inches
-
Item weight: 0.986 ounces
-
ASIN: B07XD7JGRS
₹4,882.00 -