Hex
-
HEX ADS-B IN CARRIER BOARD FLIGHT CONTROLLER
This is an updated version of the original carrier board; its overall footprint is
identical to the previous versions and main changes compared to original
carrier are as follows:- Integration of uAvionix ADS-B IN Receiver
- Built-In ADS-B Antenna
- Removal of Intel Edison Bay and Debug USB Ports
- New Product Livery
- Correct labelling Of CAN Ports
₹15,000.00₹15,500.00 -
HEX DATA MODEM RFD 900 FLIGHT CONTROLLER
- The design TXMOD is an all in one long-range telemetry data
and RC control system. - Designed to work in conjunction with any Radio
Controller capable of accepting JR Transmitter Modules, the RFD TX Module can
transmit the PPM stream from the controller to the vehicle via the RFD900X
long-range telemetry modem while also receiving telemetry data received from
the aircraft. - The module’s built-in WiFi link allows for a simple webpage-based
configuration and broadcasting of telemetry data to a computer or smart device. - It is a JR style module that plugs into any RC transmitter that has can accept
JR style modules (Frsky Taranis, JR, Frsky Horus) It provides a bridge between
the RC transmitter and aircraft while carrying RC PPM data and mavlink
telemetry streams at the same time.
₹27,500.00₹28,000.00 - The design TXMOD is an all in one long-range telemetry data
-
HEX HERE3 GPS FLIGHT CONTROLLER
- The Here3 GPS is a high precision GNSS system that supports
RTK mode, built with CAN protocol. - It is also designed to be dust-proof and
splash-proof up to a certain limit. Equipped with STM32F302 processor, the
Here3 provides faster processing speed and better reliability. - The Here3 has built-in sensors including compass, gyroscope,
accelerometer, and status LED. It runs on Chibios real-time operation system. - Its open-source structure is ideally suited to developers who need specialized
requirements on their navigation system.
₹15,000.00₹15,500.00 - The Here3 GPS is a high precision GNSS system that supports
-
HEX KORE CARRIER BOARD
- The primary
purpose of the Kore Multi-Rotor Carrier Board for The CUBE is to reduce the
rat’s nest of wires and modules typically associated with a multi-rotor
assembly. - It provides built-in power distribution, redundant power supplies for
the autopilot, built-in fail-over power selection, a separate payload power
regulator, and many other features. - While
this carrier board is geometrically optimized for quadcopters, X8
configurations, and octocopters, it provides connections for every function of
The CUBE autopilot. - Therefore, this board can be integrated into any vehicle
type that is supported by the CUBE, including all other multi-rotor frame
types, plane, rover, sub, and antenna tracker.
₹24,250.00₹24,750.00 - The primary
-
HEX CUBE ORANGE
- The Cube Orange target to education, drones’ lovers and
professional cost-effective flight control hardware providers. - The new generation of more powerful H7 processor, stronger
performance, faster, more secure, built-in triple redundant sensor, temperature
control shock absorption IMU. - With the help of flight software, Cube Orange can completely
fly any remotely controlled aircraft, helicopter or multi-rotor vehicle and
become a more professional UAV platform.
₹21,500.00₹22,000.00 - The Cube Orange target to education, drones’ lovers and
-
HEX CUBE ORANGE WITH ADS-B IN
The Cube Orange New Orange cube with H7
processor New carrier board with ADSB INStandard set which includes
Orange Cube and ADSB carrier
Power prick mini
Wiring pack
USB cable
fittings (tape screws)
₹28,500.00₹30,000.00 -
HEX MINI CARRIER BOARD
- Mini Carrier Board has the standardized DF17
connector which allows user to connect it to every version of the Cube flight
controller. - With smaller size and almost the same capability with Pixhawk 2.1
standard carrier board, it can better fit-in to those applications which have
size limits. - Also, it can be equipped with the Cube Mini to better fulfil the
requests from customers.
₹6,250.00₹6,750.00 - Mini Carrier Board has the standardized DF17
-
HEX CUBE BLACK FLIGHT CONTROLLER
- The controller is designed to be used with a
domain-specific carrier board in order to reduce the wiring, improve
reliability, and ease of assembly. For example, a carrier board for a commercial
inspection vehicle might include connections for a companion computer,
while a carrier board for a racer could include ESCs form the frame of the
vehicle. - Cube includes vibration isolation on two of
the IMU’s, with a third fixed IMU as a reference/Backup.
₹24,000.00₹24,500.00 - The controller is designed to be used with a
